LCU40H 24volt Swing Gate Control Panel

LCU40H for 24 volt swing gate motors up to 12A

Ditec LCU40H control units allow you to easily configure, assisted by a digital display, the automation operating mode and continuously monitor position and speed of the gate, allowing fine tuning of acceleration, deceleration and breakaway current, the deceleration distance and approach speed in opening and closing.

Thanks to the additional two plug-in card slots you can further expand the functionality of the system with self-monitored safety edges, a magnetic loop detector or Bluetooth module.

Ditec LCU40H control units feature incredible ease of use (thanks to advanced self-learning procedure during installation) and Virtual Encoder technology (which ensures a constant monitoring of impact forces and the immediate detection of obstacles, in full compliance with 13849, with or without the installation of active safety edges).
Advanced functions including solar mode make the LCU40H the first choice for installations and integration with security devices.

Ditec LCU40H is compatible with Ditec PWR25H, Ditec PWR35H, Ditec PWR50H/HV/HR, Ditec ARCBH/1BH, Ditec Facil, Ditec Cubic, Ditec Dor

---

DOWNLOADS:

 Brochure  LCU40H Technical Manual